Decratex Sealer Gloss

Polycote Decratex Sealer Gloss is a two part, non-toxic and non taint, polyurethane floor coating, which provides excellent chemical resistance, is light-fast and flexible and gives good resistance to abrasion and trafficking. Applied by brush or roller it produces a seamless, hard wearing, hygienic floor finish.

Ideal in food preparation and manufacturing areas, laboratories, chemical plants, aircraft hangars, abattoirs, breweries, bakeries, operating theaters and all areas where a
long-lasting, easily cleaned, high chemical resistance is required.

The temperature for application of Decratex Sealer Gloss must be between 5°C and 30°C. Can be applied by brush or roller.

Pot Life @20°C: Approx. 30 minutes
Re-coat time: 6 hours or once the surface has lost its stickiness
Light traffic: 12-16 hours
Full strength achieved: 7 days
Coverage: 20m² at 200 microns thickness

Please consult the technical data sheet for full technical product data.

Surface Preparation

Once the Decratex Resin and aggregate have completely cured, sweep or vacuum off any excess aggregate.

Mixing

Having fully prepared the substrate, stir the individual components before mixing together. Add Part ‘B’ to Part ‘A’ and thoroughly mix for at least 3 minutes. For best results use a heavy duty slow speed drill with a mixing paddle.
ENSURE THOROUGH MIXING AS AN UNMIXED PRODUCT WILL RESULT IN A POOR OR NON-CURE SITUATION.

Application

Apply by brush or roller. Re-coat time is 6 hours or once the surface has lost tackiness. The temperature for application of Decratex Sealer Gloss must be between 5°C and 30°C.