Jointex SP Primer
Porous surface primer for use with Jointex SP
- Easy to use single pack product
- Increases adhesion of Jointex SP
- Fast curing
£34.50 (ex VAT)
Jointex SP Primer Product Details
Jointex SP Primer is a single pack solvent based product designed to increase the adhesion of Jointex SP to porous surfaces. Overcoating can take place after only 1 hour.
Use on: Concrete
Use where: Internal/External
Typical industries: Commercial and industrial premises
Type of job: For use prior to an application of a Jointex SP in an expansion joint
Approximate coverage: 125m for a 6mm joint (depending on porousity)
Cure time: Approximately 1 hour @ 20oC
Special features:Fast curing
Pot life:10 mins @ 20oC
Application temperature:5oC – 35oC
Number of parts supplied:1
Primer for:Jointex SP
Please consult the technical data sheet for full technical product data.
Thorough substrate preparation is essential.
The joints should be free from all loose and friable material. The surfaces should clean, dry and free from all contamination. If there is ANY doubt about grease on the surface, the surface should be degreased using Polycote Degrease IT.
Jointex SP Primer is simple to apply. One coat should be applied using a clean dry brush.