| Quantity | Discount (%) | Price |
|---|---|---|
| 1 - 2 | — | £148.50 |
| 3 - 9 | 3.77 % | £142.90 |
| 10 - 19 | 6.5 % | £138.85 |
| 20 - 49 | 9.16 % | £134.90 |
| 50+ | 11.25 % | £131.80 |
Price Match Guarantee
Next day delivery*
30 Day trade accounts
Fast curing, low temperature concrete repair mortar. Mix with warm water so also excellent for damp areas, particularly entrances to freezers.
Cretex LT is specialist cementitious floor repair mortar with a very fast cure at low temperatures and very rapid strength build up. Ideal for chilled food areas due to it’s non-tainting odourless formulation.
Use on: Concrete. Around ironwork. For other substances contact Polycote Experts
Use where: Internal/External
Typical industries: Cold Store environments, busy 24 hour working environments
Type of job: Ideal for repairs to floors, columns, steps, nosings, kerbs and areas requiring minimum downtime
Approximate coverage: 25 kg unit – 1.2m2@ 10mm average thickness
Cure time: 2 hours @ 20°C
Special features: Heavy duty, Fast curing, Apply to damp or dry surface
Pot life:10 mins @ 20°C
Application temperature:-20oC to + 35oC
Depth of repair (1 layer):10mm – 50mm
Fully cured strength:55N/mm2
Number of parts supplied:3
Priming required:No
Please consult the technical data sheet for full technical product data.
Preparation:
Thorough substrate preparation is essential.
Concrete repairs should be prepared with squared off edges having a 10mm minimum vertical lip. Remove all loose material – wire brushing is advisable. Sweep clean or vacuum. The surface must be free from grease, oil or contamination. A gas torch will help to remove oil from the surface.
Mixing:
For application temperatures below 5oC – pre-warm the mixing vessel using hot water and warm the mixing water to between 25oC and 30oC. This will accelerate the cure time.
Measure 1.5Ltrs water into a clean mixing bucket and add the complete 25kg unit quantity of Cretex LT powder.
DO NOT EXCEED the stated ratio of water to powder.
Mix to a trowellable consistency using a heavy duty slow speed drill and mixing paddle or force action mixer.
Do not mix more than can be applied in 10 minutes.
Application:
Having prepared and pre-wetted the substrate, apply the material using a trowel immediately after mixing.
We promise to beat any quote in the UK when quoting like for like.
