Price Match Guarantee
Next day delivery*
30 Day trade accounts
A methacrylate based high build durable resin floor coating for warehouse floors and other industrial functions – extremely fast curing.
Flortex® MC is an extremely hard-wearing methacrylate based high build resin floor coating. It can be applied at very low temperatures and cures with outstanding rapidity, enabling application with minimal downtime. Two grades are available: Flortex® MC Standard for fast curing at normal temperatures; and Flortex® MC CSG for temperatures down to –40°C. Please specify when ordering.
Typical Uses
Flortex® MC is suitable for almost any floor coating situation, particularly where rapid installation and long-term durability are paramount. Flortex® MC CSG is primarily used in cold stores and industrial refrigerators and freezer floors.
Suitable Substrates
Flortex® MC is designed for application to concrete surfaces.
Colour
Flortex® MC is available in a range of 7 colours.
Packaging
Flortex® MC is supplied in pre-measured quantities as a three-part system, comprising of a 5 litre unit of acrylic resin Part ‘A’, a powder hardener Part ‘B’, plus a separate pigment pack Part ‘C’.
Pot life: 10 minutes
Application temperature: 0°C to +30°C
Cure time: 60-90 minutes
Number of parts supplied: 3
Coverage: 15-20m² per 5kgs unit
Primer required: The substrate should be prepared and primed with Polycote MC Primer. See relevant Data Sheet for full recommendations on preparation and priming.
Please consult the technical data sheet for full technical product data.
Surface Preparation
The substrate should be prepared and primed with Polycote MC Primer. See relevant Data Sheet for full recommendations on preparation and priming.
Mixing
BEFORE MIXING THIS PRODUCT YOU MUST BE TOTALLY PREPARED for rapid uninterrupted
application of the complete mixed quantity WITHIN 15 MINUTES.
Thoroughly shake the bottle of resin to ensure total dispersion of the contents (ensure the wax is fully mixed especially when temperature is low), then pour into a clean, plastic bucket. Add the powder pigment and stir thoroughly using a heavy-duty slow speed drill with mixing paddle for 2-4 minutes. When the pigment is fully dispersed add the powdered Hardener and disperse.
ENSURE THOROUGH MIXING AS AN UNMIXED PRODUCT WILL RESULT IN A POOR OR NON-CURE SITUATION.
Application
Once the product is thoroughly mixed, APPLY IMMEDIATELY using a brush or roller, making sure the area is completely covered. Particular attention should be given to doorways and other areas of high traffic. When finished, DO NOT scrape the remaining contents from the container as this will invariably include unmixed raw resin.
Non-slip Applications
For slip resistance, Calcined Bauxite aggregate may be sprinkled into the wet PRIMER. Please refer to MC Primer Data Sheet.
We promise to beat any quote in the UK when quoting like for like.
