Tough, fast-setting, self-smoothing cement floor screed. Super smooth and dust free. Suitable for heavily trafficked industrial applications after only 24hrs.
| Quantity | Discount (%) | Price |
|---|---|---|
| 1 - 4 | — | £44.65 |
| 5 - 9 | 4.03 % | £42.85 |
| 10 - 19 | 9.07 % | £40.60 |
| 20 - 49 | 14 % | £38.40 |
| 50 - 99 | 17.69 % | £36.75 |
| 100+ | 21.84 % | £34.90 |
Price Match Guarantee
Next day delivery*
30 Day trade accounts
Tough, fast-setting, self-smoothing cement floor screed. Super smooth and dust free. Suitable for heavily trafficked industrial applications after only 24hrs.
Easi-Screed Industrial is a dual-purpose polymer-modified, cement-based internal sub-floor smoothing interior underlayment or wear surface topping, which is simply mixed with water to provide a durable, heavy duty industrial floor topping with a strong, close tolerance level finish.
Rapid curing allows early trafficking and over coating of Easi-Screed Industrial with Polycote Flortex SG, is recommended although not essential for all applications.
Easi-Screed Industrial is used to level uneven internal concrete floors and provide a strong finished floor surface. It is ideal for situations where rapid installation and curing are required. Typical applications include warehouses, factories and workshops.
Suitable substrates: Easi-Screed Industrial is designed primarily for use on power-floated or tamped concrete, along with existing cementitious & anhydrite based screeds.
Colour: Easi-Screed Industrial is grey in colour, subject to slight variation depending on current raw materials, mixing and application conditions.
Packaging: Easi-Screed Industrial is supplied in 25kg bags.
Pot life: 20-30 mins @ 20°C
Application temperature: 10°C to 35°C
Depth of repair (1 layer): 3mm – 15mm
Fully cured strength: 1 day – 25N/mm²
7 days – 35N/mm²
28 days – 45N/mm²
Number of parts supplied: 1
Priming required: Concrete or sand and cement screeds – prime with Polycote Easi-Screed Primer.
Non-absorbent surfaces – prime with Polycote WD Primer. Please refer to relevant Data Sheets for preparation and priming methods.
Please consult the technical data sheet for full technical product data.
Surface Preparation
Thorough substrate preparation is essential.
Follow recommendations given on the relevant primer Data Sheet.
See ‘Priming’ below for the primer appropriate to your application.
Priming
Concrete or sand and cement screeds – prime with Polycote Easi-Screed Primer.
Non-absorbent surfaces – prime with Polycote WD Primer. Please refer to relevant Data Sheets for preparation and priming methods.
Mixing
Measure 4.5L of clean water into a suitable sized bucket.
Gradually add the entire 25kg quantity of powder whilst mixing with a heavy duty slow speed drill and mixing paddle.
Mix for at least 3 minutes to allow the additives to dissolve and produce a homogenous mix. Allow the mix to stand for 2-3 minute and mix briefly for 1 minute, afterwards the free-flowing screed will be ready for application directly onto the prepared substrate.
Ensure thorough mixing as an unmixed product will result in a poor or non-cure situation.
Application
Starting at the furthest corner from the exit pour the material evenly onto the floor to the required thickness and allow the material to start levelling.
The use of depth adjustable floats or a pinned/notched leveller is recommended to assist in spreading the screed to a constant thickness.
A spiked roller should be used immediately over the entire area to eliminate any bubbles trapped within the screed. Failure to spike roll may result in a porous surface as the bubbles escape whilst curing takes place.
The next mix of material must be rapidly produced and poured along the wet edge of the material as well as across the exposed floor.
Each application should be laid within 25 minutes of the area adjoining in order to blend evenly into the edge of the previously laid material.
This can be helped by gently trowelling along the joint.
Once the workable time has been exceeded it is not possible for the new material to be blended into previously applied material. Therefore the floor topping should ideally be applied to the entire area in one continuous operation.
Cementitious screeds are susceptible to damage from liquid and chemical attack (including prolonged or constant use of water) and should therefore be sealed suitably prior to the use of such products.
Pumped Application
Easi-Screed Industrial is suitable for use in conjunction with professional mixer pump systems, enabling continuous application of large areas. Please contact Polycote Technical Helpline.
Application Conditions
Ambient temperature should be between 10˚C and 35˚C for 48 hours before, during and after completion of installation.
Underfloor heating must be switched off during this period.
Atmospheric relative humidity should be below 90% and the moisture content of the subfloor should be below 75%. Avoid exposure to sunlight and draughts for 5 hours as this may cause premature curing and hairline cracks.
Application Thickness
The recommended range of applied thickness is from 3mm minimum to 15mm maximum in one layer. For filling deeper areas please contact the Polycote helpline for advice.
Working & Curing Times
The working time of Easi-Screed Industrial once mixed is 20-30 minutes at 20˚C.
The surface will withstand foot traffic after approximately 4 hours depending on temperature and may be overcoated with Polycote Flortex SG after 24 hours.
The problems caused by tough, uneven surfaces are known only too well along with the difficulties of repair and downtime needed to provide a smooth, easy-to-use floor.
Far superior to traditional screeds, however, this self-smoothing floor screed is the professional answer. Due to its incredible strength (over 40N/mm²) and its fast curing (drive on time of only 24 hours) and the fact that we can lay as much as 2000 sq.m in only one day has resulted in this product being proven worldwide!
This industrial floor screed has been made so easy to use that most companies now prefer completing the work themselves to save a lot of time, money, and effort.
The Easi-Screed Industrial range is a dual-purpose polymer-modified, cement-based internal sub-floor smoothing interior underlayment or wear surface topping.
A cementitious self-smoothing industrial floor screed containing graded aggregates and acrylic polymer powder.
Our floor screeds are simply mixed with water to provide a durable, heavy-duty industrial floor topping with a strong, close tolerance level finish.
It is excellent for smoothing out worn or ridged concrete in industrial environments and achieves a strong, non-dusting, close tolerance level finish. A 6mm minimum application thickness is required.
Rapid curing allows early trafficking and over-coating of Easi-Screed Industrial with Polycote Flortex SG, which is recommended although not essential for full durability in all applications.
Floor screeds are used to level uneven internal concrete floors and provide a strong finished floor surface. It is ideal for situations where rapid installation and curing are required.
Screeds are grey in colour, subject to slight variation depending on current raw materials, mixing and application conditions.
Screeds are often an excellent solution.
Typical Industries:
A wide range of industrial floors including warehouses, factories, garages, workshops, parlours, and dairies.
We promise to beat any quote in the UK when quoting like for like.
