Anti-slip surface spray
The ideal quick anti-slip aerosol spray solution for concrete, metal, ceramic and wood surface
Price Match Guarantee
Next day delivery*
30 Day trade accounts
Duragrip Anti-Slip Spray is the ideal quick anti-slip solution for concrete, metal, ceramic and wood surfaces.
Based on a fast drying acrylic modified short oil alkyd, it is touch dry in 30 minutes.
Ideal for metal, concrete, ceramic, wood surfaces and properly prepared painted surfaces.
Duragrip Anti-Slip Spray is available in black, yellow and clear.
Duragrip Anti-Slip Spray is supplied in 400ml cans.
Thorough substrate preparation is essential.
Remove all loose material – wire brushing is advisable. Sweep clean or vacuum. The surface must be free from grease, oil or contamination.
A gas torch will help to remove oil from the surface. If this is not practical, Polycote Degrease IT may be used to clean the area but this must be thoroughly rinsed off and the substrate dried, before applying Duragrip Anti-Slip Spray. The surface must be clean and dry during application.
Remove cover cap. Shake vigorously for at least one minute after the rattle of mixing balls are heard. Shake frequently during use. Hold can approximately 25cm from surface. Use back and forth motion keeping can parallel with surface. Ensure that can is in motion when spray button is pressed to avoid runs and sags. Apply several thin layers at a few minute intervals to achieve adequate coating thickness. After use, turn can upside down and press spray button for 2-3 seconds to clear valve.
We promise to beat any quote in the UK when quoting like for like.
