| Quantity | Discount (%) | Price |
|---|---|---|
| 1 - 2 | — | £96.90 |
| 3 - 9 | 4.28 % | £92.75 |
| 10 - 19 | 8.54 % | £88.62 |
| 20 - 49 | 12.49 % | £84.80 |
| 50+ | 16.51 % | £80.90 |
Price Match Guarantee
Next day delivery*
30 Day trade accounts
A fast curing concrete repair mortar that can adhere to damp concrete flooring. Ultra tough and cures to an incredible 53N/mm compressive strength. Non shrink formulation
Cretex Rapid is a fast concrete repair mortar perfect for repairing damaged concrete flooring. Ability to withstand heavy traffic in only 1 hour and can be used in dry and damp areas.
Use on: Dry or damp concrete. For other substances contact Polycote Experts
Use where: Internal/External
Typical industries: Medical, animal, food processing and working environments.
Type of job: Repairs to spalling and damaged floors, kerbs, plinths, columns, coping, sills, lintels and beams. Perfect for forming coving.
Approximate coverage: 10 kg unit – 0.25m² at 20mm nominal thickness
Cure time: Heavy duty traffic – 1 hour @ 20°C
Special features: Fast curing, easy to use, part mixed so no waste, heavy duty, non-toxic, non-odourless, non-taint, can be part mixed – no waste. Cretex Rapid does not shrink, is water-resistant once cured and will protect exposed reinforced steel against corrosion. Due to its fast curing ability, it will not slump and may be used on vertical or horizontal surfaces
Pot life: 10 mins @ 20°C
Application temperature : 5°C – 35oC
Depth of repair (1 layer): 10mm – 50mm
Fully cured strength: 53N/mm2
Number of parts supplied: 1
Priming required: Dusty, dry substrates should be lightly dampened with water to reduce suction.
Please consult the technical data sheet for full technical product data.
Surface Preparation
THOROUGH SUBSTRATE PREPARATION IS ESSENTIAL.
Concrete repairs should be prepared with squared off edges having a 10mm minimum vertical lip.
Remove all loose material – wire brushing is advisable. Sweep clean or vacuum.
The surface must be free from grease, oil or contamination. Dusty, dry substrates should be lightly dampened with water to reduce suction.
Mixing
The recommended mixing ratio of powder to liquid is 10kg powder to 600ml water by weight, the water in a suitable mixing bucket and gradually add the powder whilst mixing until a slump free trowelable consistency is obtained. Mix thoroughly for at least 1 minute using a heavy duty, slow speed drill and mixing paddle.
DO NOT MIX MORE THAN CAN BE APPLIED IN 10 MINUTES.
Having prepared and pre-wetted the substrate, apply the material using a trowel IMMEDIATELY AFTER MIXING.
Application Temperature
Normal application temperature is between 5˚C and 30˚C.
For colder environments down to –20˚C minimum, preheating may be necessary as described under ‘Mixing’ above, and the repair may require insulated covering.
For more information on this please phone Polycote Technical Department.
Application Thickness
The recommended range of application thickness is from 20mm minimum to 50mm maximum in one layer.
Thinner applications down to 5mm may be applied but the strength of the product may be compromised.
We promise to beat any quote in the UK when quoting like for like.
