| Quantity | Discount (%) | Price |
|---|---|---|
| 1 - 2 | — | £96.90 |
| 3 - 9 | 4.28 % | £92.75 |
| 10 - 19 | 8.54 % | £88.62 |
| 20 - 49 | 12.49 % | £84.80 |
| 50+ | 16.51 % | £80.90 |
Price Match Guarantee
Next day delivery*
30 Day trade accounts
A fast curing, polymer modified concrete repair mortar that can adhere to damp concrete flooring. Ultra tough and cures to an incredible 53N/mm compressive strength. Non shrink formulation
Cretex Rapid is a magnesium phosphate cementitious floor repair comprising rapid setting cement modified with a combination of graded aggregates and an SBR polymer latex liquid, producing excellent adhesion and physical properties. Cretex Rapid does not shrink, is water resistant once cured and will protect exposed reinforcing against corrosion.
Cretex Rapid can easily be part mixed, eliminating waste.
Being solvent free, non-toxic and non-taint, Cretex Rapid is ideal for use in medical, animal, foodprocessing and working environments. Typical purposes include repairs to, spalling or damaged floors, kerbs, plints, columns, coping, sills, lintels and beams. It is ideal for forming coving.
Suitable substrates: Cretex Rapid is designed primarily for use on concrete. The product is chloride free and may safely be used in contact with cast iron and steelwork. It is suitable for damp area altough application to WET substrates is not recommended
Colour: Cretex Rapid is grey in colour.
Packaging: Cretex Rapid is supplied in 10kg units.
Pot life: 10 mins @ 20°C
Application temperature : 5°C to 35oC
Application thickness: The recommended range of application thickness is from 20mm minimum to 50mm maximum in one layer.
Thinner applications down to 5mm may be applied but the strength of the product may be compromised.
Fully cured strength: 53N/mm2
Number of parts supplied: 1
Priming required: No, however, dusty, dry substrates should be lightly dampened with water to reduce suction.
Please consult the technical data sheet for full technical product data.
Surface Preparation
THOROUGH SUBSTRATE PREPARATION IS ESSENTIAL.
Concrete repairs should be prepared with squared off edges having a 10mm minimum vertical lip.
Remove all loose material – wire brushing is advisable. Sweep clean or vacuum.
The surface must be free from grease, oil or contamination. Dusty, dry substrates should be lightly dampened with water to reduce suction.
Mixing
The recommended mixing ratio of powder to liquid is 10kg powder to 600ml water by weight, the water in a suitable mixing bucket and gradually add the powder whilst mixing until a slump free trowelable consistency is obtained. Mix thoroughly for at least 1 minute using a heavy duty, slow speed drill and mixing paddle.
DO NOT MIX MORE THAN CAN BE APPLIED IN 10 MINUTES.
Application
Having prepared and pre-wetted the substrate, apply the material using a trowel IMMEDIATELY AFTER MIXING.
We promise to beat any quote in the UK when quoting like for like.
