Industrial Floor Cleaner

Suitable Substrates

Polycote Industrial Floor Cleaner is safe to use on concrete, quarry tiles, most plastics (including vinyl), ceramics, rubber, glass, enamel, metals, painted surfaces etc. It is non-hazardous and contains no aggressive alkalis, silicates, solvents, phosphates or harmful substances.

Colour

Polycote Industrial Floor Cleaner is a golden liquid.

Packaging

Polycote Industrial Floor Cleaner is supplied in 5L or 20L units.

Shelf Life and Storage

Polycote Industrial Floor Cleaner has an anticipated shelf life of 12 months if stored in unopened containers. Protect from frost and store in ambient temperatures above 10°C. Handle in accordance with good industrial practice; no special precautions required with product alone.

Physical Characteristics

pH (as concentrate): Typically 11 to 12
Relative Density: Typically 1.04 g/cm³
Solubility in water: Complete

Please consult the technical data sheet for full technical product data.

pH (as concentrate): Typically 11 to 12
Relative Density: Typically 1.04 g/cm³
Solubility in water: Complete

Application Rates and Methods

Manual: Dilute 1 part product in 20 to 50 parts water. Dilution rate depends on level and type of soiling. Cold water can be used, but for optimum results use water at approx 40°C. Apply to surface with cloth, sponge, spray or mop and bucket. Rinse and leave to dry as necessary.

Floor Cleaning Machines

Dilute 1 part product in 50 parts water and add to the tank of the automatic floor cleaning machine. Make the first pass of the machine without using the vacuum, allow the product additional contact time with the floor. On the second pass scrub floor and recover waste water as usual.

Pressure Washers

Use at a rate of 1 part product in 30 to 100 parts water through medium or high pressure washer. Product may be applied at low pressure and then
removed with high pressure if required.

Before using this product, please ensure you have received and read carefully both the Hazard Label applied to the container and the relevant Material Safety Data Sheets.