Flortex PU Twin Pack – Matt – Clearance
Florex PU is a totally impervious hardwearing floor sealer. The polyurethane formula will adhere to almost any substance including concrete. This versatile concrete floor sealer will reduce porosity while providing a dustproof surface. Can also be used for walls. Comes with either a matt, satin or gloss finish.
- Strengthens weak/poor concrete
- Impact and abrasion resistant
- Good chemical resistance
- Extremely easy to clean
- Will adhere to almost any surface
£129.80 (ex VAT)
Flortex PU Twin Pack – Matt – Clearance Product Details
Flortex PU Twin Pack has been created to provide a totally impervious hard wearing floor sealer. Available in either a matt, satin or gloss finish.
The polyurethane formulation will adhere to a wide range of substances including walls and floors, and will reduce porosity whilst providing a dustproof surface. The coating is not only UV light resistant but is also extremely easy to clean.
Supplied in 5 litre units.Coverage: approx 8-10m2 per litreBargain Basement versions available at big discounts
Pot life:1 – 2 hours @ 20oC
Application temperature:10oC – 30oC
Initial curing time:6 – 8 hours
Light traffic:12 – 16 hours
Full traffic:2 days
Recoat time:6 – 8 hours
Number of parts supplied:2
Priming required:Porous surfaces should be primed with WD Primer
Please consult the technical data sheet for full technical product data.
Preparation:Thorough substrate preparation is essential.Surfaces to be coated must be clean, dry and free of loose contaminants.
Air temperature minimum 5oC, maximum 30oC, humidity 70% RH maximum. Ensure good drying conditions prevail throughout the application and cure of the product.
Having fully prepared the substrate, stir the individual components before mixing together.
Add Part ‘B’ to Part ‘A’ and thoroughly mix for at least 3 minutes. For best results use a heavy duty slow speed drill with a mixing paddle.
Care must be taken when mixing to ensure that the hardener is properly dispersed.
Ensure thorough mixing as an unmixed product will result in a poor or non-cure situation.
Flortex PU Twin Pack can be applied by brush or roller at a thickness of 40 microns.
Only logged in customers who have purchased this product may leave a review.