Deckseal

Typical Uses

DeckSeal is ideal for medium trafficked areas such as decking, gazebos, pergolas, sheds and fences. It can be used either internally or externally.

Suitable Substrates

DeckSeal is designed for use on timber and can be used on vertical or horizontal surfaces. It cannot be used on pre-treated timber where  polyurethanes or wax have been used.

Colour

DeckSeal is colourless.

Packaging

DeckSeal is available as a 2.5 or 5  litre unit.

Please consult the technical data sheet for full technical product data.

Application temperature: +5°C – +25°C

Coverage: Approximately 6-8m² depending on porosity.

Curing times:

Touch Dry: 1-2 hours

Accept foot traffic: After 3 hours

Accept vehicles: After approximately 36 hours

These times are based on a temperature of 20°C. In cooler periods, these times may be extended.

Surface Preparation

THOROUGH SUBSTRATE PREPARATION IS ESSENTIAL.
The area must be free from all oil, grease, dust and weak laitance, and the area must be dry and clean.
ONCE PREPARED, THE AREA MUST BE KEPT CLEAN AND FREE OF TRAFFIC.

Application

Do not thin.
Start by giving the product a thorough stir to ensure that any heavy components within the material are equally dispersed throughout. Application is best completed by airless spray, using a sprayer that is suitable for solvent based products with vitron seals. Alternatively, use a brush or long pile roller; do not use a foam roller. Apply a thin even coat and do not allow the product to puddle.
We strongly advise a test area to be completed first.

Curing Time

DeckSeal should be touch dry in approximately 1 to 2 hours, can be foot trafficked after 3 hours, and will accept vehicles after approximately 36 hours. These times are based on a temperature of 20°C. In cooler periods, these times may be extended.

Application Conditions

The temperature must be between +5°C and +25°C. The temperature should be within this range until the product has completely cured.

Coverage

DeckSeal will cover approximately 6-8m² per litre depending on porosity.

Cleaning

Tools and equipment should be cleaned whilst resin is still wet with Solvent Cleaner. Hands and skin should be cleaned immediately with Organic Hand Cleaner.

Shelf Life and Storage

DeckSeal has a shelf life of 18 months and should be stored in a cool, dry place that is under cover.

Before using this product, please ensure you have received and read carefully both the Hazard Label applied to the container and the relevant Material Safety Data Sheets.