Balcony Coat PU Thinners
Balcony Coat is a substantial trowel applied coating and two coats are required. However, the first top coat is best applied by brush or roller and to enable this, Balcony Coat PU Thinners should be mixed into the Balcony Coat product to thin it to a brushable consistency
£38.90 (ex VAT)
Balcony Coat PU Thinners Product Details
Following many and varied requests for a tough, clear or coloured sealer for balcony and tiled areas this coating has been formulated to easily withstand pedestrian use, tables and chairs.
Balcony Coat retains high elasticity to cope with expansion and contraction well known on external areas and is an easy to use single pack, UV resistant non yellowing formulation.
Balcony Coat is totally waterproof and is the ideal solution for where water ingress is a problem.
Top Coat supplied in 5kgs units (Coverage: 25sq.m for the first coat and 12.5sq.m. for the second coat)
Primer is 0.8kgs (Coverage: 20-25sq.m).
Unit size: 1 litre
Application temperature: 10°C to 25°C
Drying time: Primer: 30 minutes
Top Coat: Allow minimum of 12 hours before overcoating
Coverage: 1st Coat: When added to Balcony Coat this will achieve up to 25 sq.m
2nd Coat: Please note; Balcony Coat should be applied neat (without the Balcony Coat PU Thinners) at a rate of 12.5 sq.m per unit
Please consult the technical data sheet for full product technical data.
Ensure the surface is clean, dry and stable. All loose or friable material must be removed.
Application: (To be applied over Balcony Coat Primer once it has cured).
Balcony Coat is a substantial trowel applied coating and two coats are required. However, the first top coat is best applied by brush or roller and to enable this, Balcony Coat PU Thinners should be mixed into the Balcony Coat product to thin it to a brushable/rollable consistency.
Stir Balcony Coat thoroughly before adding Balcony Coat PU Thinners
Add Balcony Coat PU Thinners to the Balcony Coat at a rate of 10% PU thinners (Please note: this is not the same as solvent cleaner or white spirit)and mix thoroughly to an even consistently. The first coat should be applied at 5 sq.m. per 1kg using a roller or brush. Before commencing with the second coat, the first coat should be lightly abraded.
Only logged in customers who have purchased this product may leave a review.
There are no reviews yet.