Duragrip Adhesive Sealant

High grade adhesive for the Polycote Duragrip Range.
May be applied to asphalt, bitumen, felt, asbestos, concrete, roofing tiles, slate, brick, stone, cast iron, galvanised steel, aluminium, lead, zinc, glass and timber.
Supplied in 380ml cartridges.

Preparation:
Any previous joint filler should be removed and all loose debris raked out. The prepared surface should be dry, clean, sound and free of flaking or loose material. Porous surfaces should be primed with Polycote SP Primer – see ‘Suitable Substrates’.

Priming:
A single coat of Polycote SP Primer should be applied if appropriate using a clean dry brush and allowed to dry for 60 minutes. Duragrip Adhesive should then be applied as soon as possible and in any case within 8 hours.

Application:
Apply using a caulking gun. Cut the nozzle at an angle to facilitate the placing of the compound.­